;)
Gulf No Rust C is water displacing type rust preventive and leaves a soft oily protective film. It is specifically designed to provide medium-term protection of spare parts, components and machined surfaces made of ferrous and non-ferrous metals including aluminium, copper and their alloys. It is blended from selected rust prevention components dissolved in a low-flash point solvent to provide excellent dewatering properties and effective protective film and has fast drying capability.
APPLICATIONS/RECOMMENDATIONS
Gulf No Rust C is recommended for medium-term protection of precision metal components made of ferrous and non-ferrous metals including aluminium, copper and their alloys after machining, extrusion, galvanizing or degreasing/ washing processes.
Gulf No Rust C is best applied by dipping but if such facilities are not available it can also be sprayed. However, all precautions applicable to solvent-based products should be observed.
Brushing of the fluid can also be used but extra care must be taken to ensure that brush fibres or extraneous dirt/ particulates are not inadvertently introduced as they have negative impact on anticorrosion performance.
If needed, the protective film can be removed by wiping off with rags/waste soaked in kerosene/mineral turpentine or by alkaline degreasants or solvent degreasing methods.
NOTE : Gulf No Rust C is compatible with normal steel components and pipework prevalent in the construction of application systems. Care should be exercised with selection and use of seals and paints in contact with this product.
SPECIFICATIONS
ISO 6743-8 (1987): ISO-L-REE category