;)
Gulf No Rust C1 is water displacing type rust preventive and leaves an oily greasy protective film. It is specially designed to provide medium-term to relatively long-term protection of spare parts, components and machined surfaces during storage. It is blended from selected rust preventive components dissolved in a low-flash point solvent to provide excellent dewatering properties and very effective protective film and has fast drying capability.
APPLICATIONS/RECOMMENDATIONS
Gulf No Rust C1 is recommended for medium and relatively long-term protection of machine tools, metal components (engine components, automotive components) after machining or extrusion or galvanizing and washing processes in factory stores or shops.
Gulf No Rust C1 is best applied by dipping but if such facilities are not available it can also be sprayed. However, all precautions applicable to solvent-based products should be observed.
Brushing of the fluid can also be used but extra care must be taken to ensure that brush fibres or extraneous dirt/ particulates are not inadvertently introduced as they have negative impact on anticorrosion performance
The protective films can be removed by wiping off with rags/waste soaked in kerosene/mineral turpentine or by alkaline degreasents or solvent degreasing methods.
NOTE : Gulf No Rust C1 is compatible with normal steel components and pipework prevalent in the construction of application systems. Care should be exercised with selection and use of seals and paints in contact with this product.
SPECIFICATIONS
ISO 6743-8 (1987): ISO-L-REE category