Insertion Paddle Wheel type Flow Totalizer

Digital flow rate Indicator with Totalizer with Relay/Batcher/Pulser (Models : P-282 & F-282)

Type of sensor         : Insertion Paddle Wheel type Flow Rate Indicator with Totalizer

Max. % of Solids      : 1 % of fluid volume, non-abrasive, non-magnetic,<100 micron in dia.& length

Mounting                 : Field or, Panel

Pipe Line size          : min. 15 mm up to 500 mm

Pressure drop          : Less than 0.1 bar

Pulses                     : 4 Pulses each rotation

Accuracy                 : +/- 1% of Full Scale if velocity is more than 0.5 m/s

Repeatability            : +/- 0.5%

Enclosure                : Weather proof IP 65

Gland                     : PO7

Fitting material        : ABS, SS304 or, SS316

Fitting Type             : Threaded, Flanged, Weld on Adaptor

Flow Ranges           : min. from 4.33 to 58000 LPM

Max. Operating Temperature: 60° C for PP Sensor with ABS fittings & 100°C for SS Sensor with SS Fitting

Sensor Cable Length : 0.5 mtrs for Field Mounted Meter & 3 mtrs for Panel Mounted Meter                              

Paddle                    : PVDF (Magnetic up to 100°C & Non Magnetic up to 80°C)

Indicator Housing      : Polycarbonate

O-rings/Pin              : Viton/Hastealloy C

Sensor Rod              : PP or, SS316

Max. Working Pressure: 7 kg/cm2 for PP Sensor with ABS fittings and

                                 12 Kg/cm2 for SS Sensor with SS fitting.

Display                   : 16 X 2 alpha-numeric LCD display with Backlit

Indicator unit dimensions: 110 mm (H) X 110 mm (W) X 150 mm (D)

Field selectable Units : M3/Hr., LPH, LPM, LPS, GPMUS, and GPMUK

Supply                    : 230 V AC +/- 15%, 50 H

T Fitting                  : It is compulsory with PP or, SS 316 Flow Sensors

                                (Selection from TYPE OF T-FITTINGS)

Line Size Selection (Water) : Min. & Max. Flow Rates