Specifically formulated to be applied directly over solid surfaces such as bare bricks, block walls etc., LUCKY MOUDLER UNIVERSAL is known to give a smooth and durable finish in just one application.
You can also try out LUCKY MOUDLER UNIVERSAL PRO, a superior variant of the same. Both products
are designed to suit Indian climate and site
working conditions.
Unique properties
Low density and higher coverage: Universal has coverage of 62 sq.m./ton.
Shrinkage-resistant: The plaster has a gradual setting time of 15 to 20 minutes and attains full strength once set, without any shrinkage cracks.
No water curing required: The plaster does not require curing after application, which helps save
water and time.
High endurance level: The plaster makes for a
resilient surface with stong bonding and high endurance capacity.
Easy to apply: The plaster has been designed for
easy work ability.
How to apply
Both the variants work best when applied with an average thickness of 12-13mm.
Mark the wall vertically, with level strips, checked
with straight edge or line and level by using an aluminum square tube. Mark the highest spots with a minimum 5mm thickness to keep the overall thickness under control.
Wet the wall suitably, at least 10 minutes prior to the application so that all trapped air can be displaced to allow the plaster to attain good contact and strength with the wall.
While mixing, take care to add the plaster to the water and not the other way around. Use clean potable water to avoid contamination. Mix both to a workable consistency. Once ready, apply the mix to the walls according to the level strips markings.
For best results, apply a tight coat with firm pressure, using the trowel.
Plaster the entire surface in line and level it out. Once it starts to set, complete the application with a final stroke of the trowel.
To get a silky finish, we recommend a light application of water, followed by a slurry coat using the trowel.