Walls, ceilings and other building surfaces usually have imperfections on the surface such as holes, dents and cracks. Reason why, a coat of durable white putty comes handy. It helps cover up the imperfections and make
the surface, super smooth. This cement-based putty, strengthened with minerals and polymers, provides
a smooth, white finish, which is good as the first coat
of paint.
Unique properties
Flawless finish: The putty gives a smooth, white finish to the surface and is an ideal substitute for paint.
Solid bonding: An excellent bonding agent to the base plaster/concrete, the crack-resistant putty can be used on worn-out surfaces with ease.
Economical: The putty is designed to remarkably reduce paint consumption, save time and money.
How to apply
Prepare the surface
Clean loose particles, dirt, grease and traces of
foreign material from the surface, using sand paper, or by chipping.
For loose plaster areas, remove the defective material and re-plaster the area.
For ceilings/walls that are uneven, apply fresh plaster and fill up the cracks in base plaster, and level it out.
Apply the mix
Dampen the surface to be plastered with clean water. Allow excess water to drain off.
Using a steel trowel/blade, apply the mixture to a thickness of about 1-2mm.
Level and smoothen the surface. A single coat of Lucky Moudler covers 6-10 sq.ft.
Cure the first coat lightly after it dries.
Once the first coat has fully dried and set, apply the second coat. Cure the second coat lightly for two days.
The thickness of each coat should not exceed
2mm and the total plaster thickness should not
exceed 3mm.
Smoothen with a steel trowel. Apply sand paper,
if desired.New Super Plaster Moudler Wall Putty