Project nr: 3248, rubber bale lifter Client: Tire industry, pharmaceutical industry VM160/180 lifting rubber bales for tyre/rubber industry. These bales are lifted into a mixer unit for further processing into tires.
Lifting rubber bales is one of the oldest and most popular applications for the VacuEasylift. TAWI has recently redesigned the suction foot used for this specifc purpose, now more efective than ever. We have several references for this type of lifting.
VacuEasylift uses vacuum for both lifting and holding loads in place. The vacuum is created by using a vacuum pump, whichcan be as far away as 30 metres from the actual lifting point. The air is channelled through a flter and air hose from a liftingtube ftted with a suction foot.
The lifting tube is suspended on a swivel and can be operated in 360 degrees. The vacuum inside the lifting tube is regulated with a control handle. When the partial vacuum rises the lifting tube retracts and lifts the load. When the partial vacuum decreases the tube stretches and lowers the load.
VacuEasylift is a thoroughly proven system meeting the highest standards of functionality and safety. The suction foot holds the load securely in place until it has reached the foor. Power cuts do not cause any safety issues. In the event of a black out, a safety valve shuts down and the load is lowered to the foor gently and under complete control.
An investment in a VacuEasylift vacuum lifter pays for itself. The system is easy to install and adjust to suit the requirements of most loads. The specifc rubber bale may need to be tested for safe lifting characteristics. Please contact for more info!