Salient features:
Machine Operator
Machine packs are produced in 3 stages with a fast tool change between each stage.
Stage1 - Forming: The precut pieces of forming material is placed on the forming dia. Forming dia slide under the top platen which is heated to preset temperature. Forming dia is lifted up with the pneumatic cylinder & press against the top platen. Vacuum suck forming material into cavity & form blister.
Stage2 - Sealing & Batch Coding: For sealing operation the forming dia & platen is removed& sealing dia & upper sealing plate is replaced & same procedure of forming is repeated for sealing. The formed trays are sealed automatically using pre-cut lidding material. Batch code embossing if necessary is carried out at this stage.
Stage 3 - Cutting: The sealed trays are cut to produce the finished packs.
Technical Specifications:
Format Dimensions : | 100 X 100 mm. |
Max. foil width : | 120 mm. |
Max. depth draw : | for PVC = 15mm & ALU/ALU = 12 deep |
Operating speed : | 12 cycles per minute. |
Power : | 230 v single phase. |
Air pressure : | 8 Bar. |
Air consumption : | 15 litres/Stoke. |
The designs & specifications are subject to change without prior notice.