;)
DESCRIPTION
PERMA RUST REMOVER is an aqueous green liquid which removes the rust and forms a protective cover around the reinforcement and other steel members. Perma Rust Remover is just brush applied on the metal surfaces. It is an essential pretreatment to the rebars before starting Perma Bond SBR or Perma Bond-AR treatments. It is also a pretreatment to steel before any epoxy or Polyurethane coating.
PRIMARY USES
PERMA RUST REMOVER is used to remove rust from metal surfaces and reinforcing bars. Treatment of steel with Perma Rust Remover is a prerquirement for
further anticorrosive repairs and epoxy coatings
ADVANTAGES
DIRECTION FOR USE
Shake the container before use. Remove any dust, dirt on concrete particles sticking on to the surface. Liberally brush apply Perma Rust Remover on the steel surface. Allow Perma Rust Remover to react with the rust for one hour and then rub out all the rust with a dry cloth or a stiff brush till a fine shiny surface is obtained. Do not wash this surface with water. Apply any subsequent coating directly.
PROPERTIES
|
Physical form |
Green Liquid |
|
Specific Gravity |
1.30 |
|
Coverage |
100 to 200 sq. ft. per Ltr. depending on extent of corrosion. |
|
Shelf Life |
1 Year |
EQUIPMENT CARE
Wash all brushes and Vessels with soap water after use. Used containers should be washed and disposed off.
HEALTH AND SAFETY
Avoid handling chemical products directly. Use hand gloves and dust masks. Contact with the skin should be immediately washed.
PACKING
1 Litre, 2 Litre, 20 litres.
QUALITY ASSURANCE
All “PERMA” branded products are manufactured under strict quality control supervision as per exact manufacturing specification. Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact the nearest Perma staff or distributor.
STATEMENT OF RESPONSIBILITY
Perma branded products when used in accordance with its current published directions for use performs as per its data sheets / catalogue. The manufacturer and the distributor will not be responsible for other materials and conditions of inferior workmanship.