;)
Specifications
Salient Feature
Machines require single-phase 220 V AC stable electric supply and a compressed air supply at 4-bar pressure.
Machine model CTSS 33 is suitable for wires from 0.5 sq mm to 2.5 sq mm.
Some of these machines can be fitted with attachments for twisting and slitting at extra cost.
Special machines for specific customer needs can also be developed by m/s ‘machine makers r.s.’.
Performance Range
| Wire Cross section | Model CTSS 33 : 0.5 to 2.5 mm2 (Contact us for sizes outside this range) |
| Length Selection | Standard range: 50 mm to 9 meters, in steps of 1mm; Range can be extended to get 20mm to 25 meters |
| Accuracy | +/- 0.2% (min. +/-1.5 mm) |
| End Stripping | Upto 35 mm at both ends (subject to material friction) Partial as well as Complete stripping possible |
| Middle Stripping | Upto 2 windows max. (Conditions apply, In select models only) |
| Multiple Wire Processing | CTSS 33 can process 2 wires at a time for Wires upto 1.0 Sq.mm. For higher sizes, machine will process 1 wire at a time. |
| Wire Types | Single core with single or multiple strands / Flexible or rigid |
| Max. Outside Diameter | 6 mm |
| Changeover setting time | 30 sec typically. |
Technical Data
| Machine Housing | Separate housing for machine & Control panel |
| Mechanical system | Rugged machine with precision mechanical system |
| Electronic system | Separate control panel with PLC and drives |
| Wire feed system | 2 stepping motors with 4 feed rollers, variable speed |
| Cutting & Stripping system | V blade pair with stepping motor, variable speed and PLC controlled strokes |
| Length Measurement system | Directly by stepping motor control |
| Power | 220V / 50 Hz, other options upon request |
| Compressed air | 5 to 7 bar, 70 to100 psi, 40 lpm (less than 0.5 hp) |
| Dimensions | Main Unit : 400mm X 400mm X 275mm(h) Control Panel : 585 mm X 275mm X 465 mm (h) Control Panel is normally kept below work table |
Production Speed
| Style | 100mm | 500mm |
| Only Cutting | 8000/hr. (15000/hr) | 6000/hr (11000/hr) |
| Cutting and single Side stripping | 4500/hr (8500/hr) | 4000/hr (7000/hr |
| Cutting and both Side stripping | 2800/hr (5000/hr) | 2300/hr (4000/hr) |
* Speed for 0.5 sq mm multi-strand wires
* Even higher speeds have been achieved in many cases.
*Speeds mentioned in bracket are with two wires at a time.
Voltage servo-stabilizer (2KVA) or CVT (1KVA) is must, to be arranged by you. Proper earthing is essential.