Waterproofing Systems

Waterproofing Systems
View :
2816
Manufacturing Country :
Mumbai
Brand :
Perma Shield
Packaging :
1 & 20 Litres containers
Product Description

DESCRIPTION
Perma Shield is a straw coloured liquid which has excellent waterproofing and protection properties. Perma Shield is effectively used in arresting nagging leakages and dampness from walls and protecting exposed reinforcements.

PRIMARY USES
1) For waterproofing terraces.
2) For arresting rising dampness.
3) For protection of exposed reinforcing steel rods.
4) For water proofing leakages from toilet units and sunk slabs.
5) For water proofing damp walls.

6) As an effective paint additive.

7) For waterproofing porous plaster surfaces. 

SURFACE PREPARATION
Surfaces to be treated with Perma Shield should be clean free from oil, grease and loose particles. All laitence and loose particles should be removed by wire brushing or mechanical scabbling. All undulation and cracks should be made good using Perma Crack fill or Perma Rapid Repair systems. In case of badly honey combed surfaces give a layer of screed or plaster to make it worthy to receive the treatment.

PERMA SHIELD SYSTEM
The system consists of application of 1 or 2 Barrier Coats depending upon severity of problem. In severe cases apply three Barrier Coats. Plaster immediately where desired.

 

PERMA
SHEILD

CEMENT

COVERAGE

Barrier coat

1 Ltr

+ 2 kg

35-40 sqt/
coat.

DIRECTIONS FOR USE
A) 1. Seepages and dampness through walls.
a) Remove the entire plaster.
b) Apply one coat of plaster and cure it for 7days.
c) Apply one coat of Barrier coat and immediately complete the second coat of plaster and cure normally.


2.Leakage from sunk slabs of toilets.
a) Stop the use of upper floor toilet till the dripping stops.
b) Remove the plaster or scrape the concrete. If the surface to be applied is concrete only which is sound then use the surface directly.
c) Apply two Barrier coats and plaster the surface immediately.
 

3.Terrace water proofing
a) On the prepared terrace surface apply two Barrier coat or one Barrier coat followed by Plaster or IPS.
4.For protection of exposed reinforcing steel.
a) Clean the rods and apply two Barrier coats.

B) AS AN EFFECTIVE PAINT ADDITIVE

     Perma Ssield dramatically modifies coloured cement paints and white   cement used in painting.  Perma Shield is added alongwith water in the powder paints at a dosage of 5 litres per 50 kg of powder paint or white cement.

PROPERTIES

Form

Liquid

Colour

Milky White

Ph

10

Stabilisation

Non-Ionic

Antioxidant

Non-Ionic

Bacteriocide

yes

Antifoam

yes

Minimum film forming temperature

5oC

PACKING
Perma Shield is supplied in 1 litre, 2 Litres , 5 Litres and 20 Litres containers.

SHELF LIFE
Two years if kept sealed in original packing in cool and dry place.

QUALITY ASSURANCE

All “PERMA” branded products are manufactured under strict quality control supervision as per exact manufacturing specification.  Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact the nearest Perma staff or distributor.

STATEMENT OF RESPONSIBILITY

Perma branded products when used in accordance with its current published directions for use performs as per its data sheets / catalogue.  The manufacturer and the distributor will not be responsible for other materials and conditions of inferior workmanship.

Name:*
Mobile:*
Email:*
Message: