High Range Hyper Plasticising Superior Quality Admixture for High Quality Concrete
SPECIFICATION Complying to ASTM C 494 Type A, F. and G IS - 9103-79 |
DESCRIPTION Perma - Hyper Plast - HP34 Plast is based on hyper plasticising sulphonated synthetic polymers. It may be dispensed at dosages varying between 1 to 2 percent by weight of cement depending upon type of concrete required. |
||||||||||||||||
PRIMARY USES 1) Perma - Hyper Plast-HP34 is recommended in all high grade concrete which has a cement content of over 375 kgs. per m³. 2) Perma - Hyper Plast-HP34 is recommended in hot weather concreting where workability retention over long periods are required. 3) Perma - Hyper Plast-HP34 is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance. 4) Perma - Hyper Plast-HP34 is also recommende where very high initial and ultimate strengths are expected. 5) Perma-Hyper Plast-HP34 is also recommended for use with Microsillica. |
ADVANTAGES 1) Hyper plasticising action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates. 2) Perma - Hyper Plast-HP34 maintains the workability over long periods. 3) Perma - Hyper Plast-HP34 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete. 4) Perma - Hyper Plast - HP34 is compatible with all types of cements including puzzolonic, fly ash / slag cements and Microsillica. 5) Perma - Hyper-HP34 Plast is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders. 6) Perma - Hyper Plast-HP34 enables production of dense impermeable and fair finish concrete. |
||||||||||||||||
DIRECTIONS FOR USE Perma - Hyper Plast-HP34 should be added to the mix along with water. Addition of plasticisers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma - Hyper Plast-HP34 can be added at the batching plant and the remaining fifty percent at site just before pouring. |
PROPERTIES
|
||||||||||||||||
COMPOSITION Perma - Hyper Plast-HP34 is based on hyper plasticising sulphonated synthetic polymers carefully selected to give superior initial and ultimate results. |
|||||||||||||||||
PACKING Perma - Hyper Plast-HP34 is available in 25 kgs, and 260 kgs, drum. |
|||||||||||||||||
SHELF LIFE Twelve months if stored in manufacturer’s original drums. Perma - Hyper Plast-HP34 should be stored in a place where temperature does not drop below +5ºC. If the product is frozen, thaw at + 30ºC and agitate until completely reconstituted. Shake well before use. |
HEALTH AND SAFETY Perma - Hyper Plast-HP34 is not a health hazard or fire risk. Spillages should be washed immediately to avoid possibilities of slipping. |