DESCRIPTION
Perma Guard is a polymer modified cementitious acrylic water proofing system with a very wide scope of applications in water proofing and corrosion inhibition situations. Perma Guard is a two component material which forms a flexible membrane upon curing.
PRIMARY USES
Perma Guard has been found to perform exceptionally with following applications:
1) RCC terrace waterproofing.
2) Sealing leakage through cast iron, asbestos or
stoneware pipes.
3) Coating on bridge girders and under deck
waterproofing of bridges.
4) Sealing cracks in asbestos cement sheets and
sealing `J' bolt openings.
5) Coating on leaky plaster surfaces.
ADVANTAGES
1) Perma Guard membrane when applied on concrete surface allows the concrete to breathe normally while waterproofing the treated area perfectly.
2) Perma guard membrane is flexible hence accommodates deflection and minor movements of the structures.
3) Being acrylic based Perma Guard has strong adhesion and corrosion inhibition properties.
4) It is easy to use. Just mix the premeasured and packed liquid and powder components of Perma Guard and brush apply.
DIRECTIONS FOR USE
1) Clean the area to remove all loose particles, oil, grease and any such deleterious products and wet it with water. If the surface is rough mix Perma Guard liquid and water in the proportion of 1:2 and brush apply on pre wet surface.
2) Mix the powder and liquid ingredients of the product thoroughly to form a smooth consistency slurry.Avoid part mixing the ingredients of packing.
3) Brush apply Perma Guard slurry on the surface to be treated.
4) Immediately cover the treated surface with cement sand 1:4 plaster and cure normally.
ACTION
When the two components i.e. acrylic liquid and polymer modified cementitious powder is mixed a smooth consistency slurry is obtained. This slurry when brush applied on the surface to be treated forms a flexible film which has very strong adhesion to the applied surface. The film is totally waterproof and resistant to chemical and pollution attacks.
PROPERTIES
PART 1 |
FORM |
Liquid |
Grey |
White |
|
- |
BULK WEIGHT |
- |
Like |
EFFECT |
|
Non |
toxic |
COVERAGE
Perma Guard covers 5 to 6 sq.ft. per kg
PACKING
Perma Guard is available in premeasured (Powder +liquid ) Packs of 10 kg/ltr and bulk.
SHELF LIFE
Perma Guard should be stored in cool and dry conditions away from moisture and direct sunlight
QUALITY ASSURANCE
All “PERMA” branded products are manufactured under strict quality control supervision as per exact manufacturing specification. Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact the nearest Perma staff or distributor.
STATEMENT OF RESPONSIBILITY
Perma branded products when used in accordance with its current published directions for use performs as per its data sheets / catalogue. The manufacturer and the distributor will not be responsible for other materials and conditions of inferior workmanship.