Warning: Undefined array key "continue" in /home2/b2bbazar/public_html/supplier/product.php on line 131

Warning: Undefined variable $result in /home2/b2bbazar/public_html/supplier/product.php on line 137
Epoxy Coal Tar Coating - manufacturers, suppliers and exporters in India
Warning: Trying to access array offset on null in /home2/b2bbazar/public_html/supplier/product.php on line 153

Epoxy Coal Tar Coating

View :
685
Manufacturing Country :
Mumbai
Brand :
Perma Master Pitch
Packaging :
2kg, 20kgs. and 40kgs packing of equal quantities of base and reactor.
Product Description

DESCRIPTION
Master Pitch is a two component liquid epoxy resin modified
with refined coal tar pitch. The superior adhesion and chemical resistance of the epoxy resin, in combination with the flexibility and water resistant qualities of pitch, produce a system that will provide a high build, ultra dense coating to protect concrete, other cementitious substrates and metal, against a wide range of aggressive media. The coating will not support the growth of bacteria. In appearance Master Pitch is smooth, glossy and black.

PRIMARY USES
Master Pitch is used to provide a heavy duty protective, waterproof, and flexible coating. Uses include, the lining of tanks, pipes and ducting. Coating concrete, asbestos cement, steel pipes and non ferrous metals, concrete roofs, floor ducts, drainage trenches. Master Pitch is particularly suitable for use in sewerage work application and in offshore or marine environments.

ADVANTAGES
1) No primer required.
2) High build coating.
3) Easy application : brush, roller, spray.
4) Economical.
5) Excellent chemical resistance to aqueous media.

DIRECTIONS FOR USE
Surface Preparation :
As with all epoxy resin systems, surface preparation has a direct effect on the performance and durability of the system. Surface to be coated should be sound, dimensionally stable, clean, free from laitence, paint oil, grease, mould release agent and residual curing compound. Concrete must be fully cured. Grit blasting, acid etching or mechanical scabbling may be necessary to ensure full removal of cement laitence and deleterious matter. Metal surfaces should be prepared by blast cleaning.

PROPERTIES

200C

 

45MIN

400C

Tack Free Time

6 Hours

300C

 

2 Hours

Within 24 hours when temperatures are within above range.

Within 7 days

 

 

 

<div style="\&quot;clear:" both;\"=""> 

 

 

 

 

MIXING INSTRUCTION
Master Pitch is supplied in pre-weighed units. Mix the base and reactor components separately for 1-2 minutes, using a slow speed high torque drill with suitable paddle attachment. Add the contents of the reactor container to the larger base container ensuring to fully drain the contents. Mix the base and reactor components together for 2-3 minutes. Pay particular attention to the side and bottom of the container. When a uniform streak free mix is achieved Master Pitch is ready for use.

APPLICATION
Master Pitch can be applied by brush or short hair roller Brush/Roller application. Apply the mixed material to a properly prepared substrate using a brush or short hair roller. The use of a painters tray is essential to extend the pot life and correctly meter the material on to the brush or roller. Apply in two coats

CHEMICAL RESISTANCE
Cured coating is resistance to: Distilled water, Brine, Effluent, Barnacle growth, Sewage, Exhaust gases, Marine Bacteria, Diluted Acids and Alkalis, Salt, Solutions (Potassium, Sodium).

WATCH POINT
No additions or ommissions are required and on no account should attempts be made to split packs. Unsuitable in situations where food stuffs or potable water will be in contact with the coating.

COVERAGE
Coverage is dependent on porosity and surface texture of substrate. 1 kg covers 12m2 per Coat,
8m2 for two coats. Two Coats DFT 120 microns.

HEALTH AND SAFETY
Master Pitch should be handled carefully.Use of mask and hand gloves recommended.

PACKING
2kg, 20kgs. and 40kgs packing of equal quantities of base and reactor.

SHELF LIFE
Atleast 6 months when stored unopened in dry, cool conditions.

QUALITY ASSURANCE

All “PERMA” branded products are manufactured under strict quality control supervision as per exact manufacturing specification.  Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact the nearest Perma staff or distributor.

 STATEMENT OF RESPONSIBILITY

Perma branded products when used in accordance with its current published directions for use performs as per its data sheets / catalogue.  The manufacturer and the distributor will not be responsible for other materials and conditions of inferior workmanship.

Fill the form and Get the Quote

Name:*
Mobile:*
Email:*
Message: