DESCRIPTION
Prema Epoxy 100 -EG is a two component epoxy suitable for injecting into the porous concrete to consolidate the structural elements
PRIMARY USES
Prema Epoxy 100 -EG is developed as a low viscosity easy flowing epoxy resin system which travels easily in the body of the concrete and consolidates all loose particles
Prema Epoxy 100-EG is used for consolidating the concrete mass in weak concrete structures.
Perma Epoxy 100 -EG is used for preventing water contact of reinforcement in structures which hold water on one side
Perma Epoxy 100 -EG is used for waterproofing leaky porous concrete structures
ADVANTAGES
Prema Epoxy 100-EG is low viscosity product hence flows freely even into the finest cracks and pores of concrete
Prema Epoxy 100-EG is fast setting hence bleeding wastage of the product are minimized
Prema Epoxy 100-EG is supplied in pre weighed containers in the proportion of mixing hence convenient to use.
DIRECTIONS FOR USE
PROPERTIES
Form |
pale Brown to Yellow clear liquid |
Specific Gravity |
1015 at 250c |
Viscosity |
500-600 CP |
Epoxy Eq. |
220-240 |
Flash Point |
Above 100 c |
Shelf Life |
12 Months |
REACTOR
Polyamide Form | Brownish/dark brown hazy liquid |
Specific Gravity | 0.97 at 25 C |
Viscosity | 350-550 CP |
Amine Value | 360-400 |
Flash Point | Above 100 C |
Shelf Life | 12 Mths |
PACKING
Perma Epoxy 100 - EG base & reactors are supplied in bulk packing.
SHELF LIFE
12 Mths from the date of manufacture if stored in a cool place in original packing.
QUALITY ASSURANCE
All “PERMA” branded products are manufactured under strict quality control supervision as per exact manufacturing specification. Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact the nearest Perma staff or distributor.
STATEMENT OF RESPONSIBILITY
Perma branded products when used in accordance with its current published directions for use performs as per its data sheets / catalogue. The manufacturer and the distributor will not be responsible for other materials and conditions of inferior workmanship.