DESCRIPTION
Perma Plaster Putty is a fine powder in white and light grey colour based on ordinary portland cement/white cement, selected polymers and fillers. The product provides a final surface for application of paint on to the walls and ceiling. This product can also be used for exterior application.
PRIMARY USE
Creation of smooth surface for application of pain to the walls and ceiling. It can be used on plaster RCC or brick or block work directly.
DIRECTION FOR USE
Clean the surface to remove dirt, dust, laitance, oil, grease etc. Dampen concrete or the plastered surface if it is very dry or wherever required.
Mix 350 to 390 ml of clean water to 1 kg Perma Plaster Putty. Mix thoroughly and keep it for 5 to 10 minutes and remix to obtain an even consistency creamy paste. Apply this paste on the plaster or brick or block work or concrete surface with spatula or putty blade. If there is a need to build up thickness it can be applied in layers taking care to see that the first layer has dried before the second layer Is applied One day light curing may be considered for optimum result. Sand paper the surface next day to perfect evenness with sand paper no 500 and dust it clean before Application of paint.
SPECIFICATION
Form | Fine Powder |
Color | White/light Grey |
Binder | Cement |
Fillers | Selected mineral filler |
Maximum Aggregate Size | 500 micron |
Bulk Density- | 1.05 |
Plastic Density | 2 |
Yield | 700 ml/kg. |
Water Requirement | 350 to 390 ml/ kg |
Pot life | 3 hours |
Coverage | 1 kg/0.75 m2/mm |
Adhesion to concrete | 10 kg/ cm2 |
Packaging
Perma Plaster Putty white/grey is available in 25 Kg multiwall laminated sacks.
Shelf Life
Twelve months if stored in manufacturer's original packing.
QUALITY ASSURANCE
All “PERMA” branded products are manufactured under strict quality control supervision as per exact manufacturing specification. Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact the nearest Perma staff or distributor.
STATEMENT OF RESPONSIBILITY
<p normal;\"="" 0);="" 0,="" rgb(0,="" 12px;="" sans-serif;="" arial,="" helvetica,="">Perma branded products when used in accordance with its current published directions for use performs as per its data sheets / catalogue. The manufacturer and the distributor will not be responsible for other materials and conditions of inferior workmanship.