Description
Perma Render Coat is a specially formulated mortar with Portland cement graded fillers and polymers to meet the requirement of waterproof crack-free thin render, for Application to walls and ceiling.
Primary Use
Perna Render coat is ideally suited for rendering concrete surfaces such as RCC walls and ceiling. It is best suited for filling up the undulations in the normal plasters. The product can be used for rendering brick works and block works. It could also used as a general purpose non-shrink crack filling and patch work repairing compound.
Guide To Application
Ensure that the surface to be rendered is clean and free from dust, dirt, grease etc. Mix Render coat with clean water, in the proportion of 3.5 to 4 volumes of powder to I volume of water. Mix till a uniform consistency smooth paste is obtained. Leave the paste for ten minutes in the pan for the entrapped air if any to escape and remix the paste. Apply the paste uniformly on to the surface to be rendered. With a putty blade or spatula level the surface to a smooth finish. The product can be applied in thinness varying between 1mm to 10 mm.
Properties
Bulk Density: 1600 kg/m3
Pot Life of paste: 45 min at 35oc
Form: Free flowing powder
Color: Grey
Coverage