DESCRIPTION
Perma Superflx is a polymer based liquid for making cement based polymer modified permeability reducing slurry coating. It is applied to concrete and mortar surfaces to prevent leakage and dampness. It has flexibility to accomodate thermal expansion and contraction of concrete.
ADVANTAGES
<div class="\" \\\\\\\\"pds\""="">
Easy to apply by brush
Good adhesion sound and prepared to substrates
Good abrasion resistance
Protects against water and salt penetration and carbonation
Non toxic when cured hence suitable for contact with drinking water
Non-corrosive to reinforcing steel
TYPICAL APPLICATION
It is used as and external and internat water proofing coating, damp proofing, hair line crack sealing and protection from chloride in the various structures such as water-tanks, basements, terraces, balconies, bridges, retaining, walls, sea walls, small flat roofs, abrasion resistent lining etc.
DIRECTION FOR USE
A dry mix of good quality cement with fine and clean sand should be prepared in the proportion of 1:1 by weight. This should be mixed with Perma Superflex in proportion of one part of Perma Superflex to four parts of the dry mix to form a slurry. For trowellable consistency and putty, the proportion of Perma Superflex should be reduced accordingly. The mixing slurry should be done in a clean container by slowly adding the powder component to Perma Superflex and stiring with a slow speed mixer. Mixing should be done until an uniform consistency is achieved. The surface to be treated should be clean and dampened immediately before the slurry application. While the surface is still damp from saturation apply the first coat and leave to harden (2-6 hours) before application of second coat.
For slurry application use a hard plastic wristled brush or broom after the second coat has been applied finish by rubbing with a soft, dry sponge. For water proofing, slurry should be used at the rate of 3 to 4 kg/m2 for two coats.
CURING
Protect the freshly applied product against direct sunlight. Use damp hessian or poly-ethylene sheets to aid curing.
IMPORTANT RECOMMENDATION
Severe water penetration and high water pressure situation may require Perma Seal or Perma Guard waterproofing systems.
SHELF LIFE
For best results use before one year in unopened condition.
PACKING
20 kgs, 10 kgs
QUALITY ASSURANCE
All “PERMA” branded products are manufactured under strict quality control supervision as per exact manufacturing specification. Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact the nearest Perma staff or distributor.
STATEMENT OF RESPONSIBILITY
Perma branded products when used in accordance with its current published directions for use performs as per its data sheets / catalogue. The manufacturer and the distributor will not be responsible for other materials and conditions of inferior workmanship.