DESCRIPTION
Perma Master Coat Clear is an aesthetic and protective epoxy resin coating which has been specifically developed to meet the 'In service' protection of concrete, metal, etc. the product is supplied as two-pack system comprising of a base and hardener. It requires only on site mixing to produce an easily applied chemical resistant finish. Perma Master Coat Clear coating will not support the growth of bacteria.
PRIMARY USE
GUIDE TO APPLICATION
ADVANTAGES
Durable
Solvent free
Non-toxic
High build coating
Water proof
Chemical resistant
Easily applied by brush or roller
PROPERTIES
Density |
1500 kg/m1 |
Bond strength |
in excess of cohesive strength of mortar |
Pot Life |
45 min at 350 C |
Tack Free Time |
6 hours at 35 °C |
Initial/Full Cure |
24 hrs / 7 days |
Shelf Life |
6 months |
Specific Gravity |
1.38 at 2 (J1C) |
Dried film thickness |
200 microns per coat |
Appearance |
Smooth and glossy |
Chemical Resistance |
Excellent |
PACKING
CHEMICAL RESISTENCE
Master Coat Clear is a resistant to the following typically encountered chemicals. Formaldehyde 40% solution, Sulpheric Acid 30% solution, Wine, Acetic Acid 5 % solution, Diesel-oil, Hydrochloric Acid 50% solution. Aviation Hydraulic Fuels (Skydrol), Nitric Acid 10% solution and vegetable oils. Master Coat Clear coating may slightly change color in certain chemical environments but the chemical resistence of the Master Coat Clear film remains unchanged.
OVERCOATING
Where areas need to be over coated due to damage etc., it is important that the area to be treated is well abraded using stiff rotary wire brush or coarse sand paper to give adequate key. Completely strip off any unsound coating and proceed with over coating as for new work.
DIRECTIONS FOR USE
QUALITY ASSURANCE
All “PERMA” branded products are manufactured under strict quality control supervision as per exact manufacturing specification. Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact the nearest Perma staff or distributor.
STATEMENT OF RESPONSIBILITY
Perma branded products when used in accordance with its current published directions for use performs as per its data sheets / catalogue. The manufacturer and the distributor will not be responsible for other materials and conditions of inferior workmanship.