Repair Mortar And Bonding Agent

We are the suppliers of a wide range of Repair Mortar and Bonding Agent. These mortars apply for restoration and rehabilitation of structures, repairing and patching works of reinforced cement concrete and reinforcing cement concrete and steel constructions. Clients can avail this repair mortar and bonding agent at a reasonable price in the market. It is widely used in the construction industry. These repair mortars are easy to apply.

<div class="\\&quot;pds" txj="" tc\\"="">

High Strength Repair Polymer Mortar and Bonding Agent

are the suppliers of a wide range of Repair Mortar and Bonding Agent. These mortars apply for restoration and rehabilitation of structures, repairing and patching works of reinforced cement concrete and reinforcing cement concrete and steel constructions. Clients can avail this repair mortar and bonding agent at a reasonable price in the market. It is widely used in the construction industry. These repair mortars are easy to apply.

High Strength Repair Mortar and Bonding Agent

Description

• Perma Bond Repair is an aqueous emulsion of Styrene Butadiene Copolymer latex, specially formulated for use with cement.
• PBR modifies the property of cement in mortars and in concrete to make them perform better.
• In terms of water proofing, repair, corrosion inhibition, bonding, durability and wear resistance.

Primary Uses

1. Corrosion protection of steel.

2. Floor screed and topping.

3. Concrete and floor screes repairs

4. Water proofing and tanking basements

5. Bonding old concrete to new concrete

Properties

Directions for Use

A) Method

1. Apply Passivator coat of 1:1 PBR + cement slurry on the cleaned steel reinforcement

2. On a cleaned and prepared concrete and steel surface after the passivator coat has dried apply Perma Bond Repair Bonding Slurry.

3. Apply Perma Bond Repair modified mortar by locator trowel. Bonding slurry sets very fast hence modified mortar application should be fast and immediate after application of bonding slurry.

4. Moist cure for 24 hours and then allow it to dry off

B) Preparation:Passivator coat/ Bond

• Coat Slurry=Cement+PBR (1 + 1)

Note: Applies Banding Slurry sets very fast. 1 litre Perma Bond Repair with 1 kg of cement gives a slurry which covers 20 to 25 sqft.