Warning: Undefined array key "continue" in /home2/b2bbazar/public_html/supplier/product.php on line 131

Warning: Undefined variable $result in /home2/b2bbazar/public_html/supplier/product.php on line 137
Water Reducing Agent for concrete - manufacturers, suppliers and exporters in India
Warning: Trying to access array offset on null in /home2/b2bbazar/public_html/supplier/product.php on line 153

Water Reducing Agent for concrete

View :
545
Manufacturing Country :
Mumbai
Brand :
Perma Plast
Packaging :
2, 20 and 210 litres drum.
Product Description

SPECIFICATION

Types A & D

Types A & D

Part 1

Type BV

9103-79

 

DESCRIPTION
Perma Plast is a water reducing plasticiser for concrete. It is a product based upon refined lingo sulphonates

PRIMARY USES
1) To increase workability.
2) To increase compressive strength.
3) To effect cement economies.
4) For hot weather concreting.

TYPICAL APPLICATIONS
1) In pre-stressed concrete.
2) In areas of congested reinforcement where high workability is beneficial.
3) In pre-cast concrete manufacture.
4) In concrete brick and block manufacture.
5) In hot weather concreting to extend workability.

ADVANTAGES
1) Increase workability - Significantly improves the
workability therefore ease of placing.
2) Improves the cohesive properties of the concrete helping to reduce segregation and bleeding.
3) Reduces water demand - Allows water reduction in the region of 10% to be achieved while maintaining workability, there by increasing strength, durability and impermeability.
4) Enables economies in the mix designs to be
achieved, therefore saving cement.

DIRECTIONS FOR USE
Perma Plast should be added to the concrete mix during the mixing cycle at the same time as the water. Never add Perma Plast to dry cement

ACTION
Perma Plast is a powerful plasticiser which disperses and deffloculates the cement particles within a concrete mix. It can be used to improve workability, without the addition of extra water, or to allow reductions in free water content of the concrete mix.

DOSAGE
Field trials should be conducted to determine the optimum addition rates of Perma Plast. A dosage range of 140 cc to 280 cc per 50 kgs of cement is recommended as an initial starting point.

PROPERTIES
Typical properties of Perma Plast are as follows:

Dark brown/black Liquid

1.20 at 25ºC

1% maximum dependent on grading of sand and water content.

Nil

Nil

0ºC. . can be reconstituted if stirred after thawing

None

 

COMPOSITION
A liquid admixture based upon refined lingosulphonates

CAUTION
Over-dosage of Perma Plast will result in the following:
Retardation of initial set.
• Increase in air entrainment.
• Increase in workability. Provided concrete is properly cured, the ultimate strength of the concrete will not be adversely affected and will generally be higher than that of normal concrete.

COMPATIBILITY
Perma Plast can be used with all types of Portland cement including Sulphate resisting. For use with other special cements, contact your nearest Perma technical Office, or distributor. Perma Plast should not be pre-mixed with other admixtures. If other admixtures are to be used in concrete containing Perma Plast they must be dispensed separately.

HEALTH AND SAFETY
Perma Plast is not a health hazard or fire risk. Spillages should be washed immediately to avoid possibilities of slipping.

PACKING
Perma Plast is available in 2, 20 and 210 litres drum.

SHELF LIFE
Twelve months if stored in manufacturer’s original packing.

QUALITY ASSURANCE

All “PERMA” branded products are manufactured under strict quality control supervision as per exact manufacturing specification.  Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact the nearest Perma staff or distributor.

 STATEMENT OF RESPONSIBILITY

Perma branded products when used in accordance with its current published directions for use performs as per its data sheets / catalogue.  The manufacturer and the distributor will not be responsible for other materials and conditions of inferior workmanship.

 

Fill the form and Get the Quote

Name:*
Mobile:*
Email:*
Message: