DESCRIPTION
Damp Guard - EP is a two component water based epoxy coating product highly useful in arrestign leakages in walls, Ceiling, RCC structures and rising dampness in internal walls. It is user friendly and easy to use.
APPLICATION
Highly effective in arresting rising dampness.
Waterproofing of RCC structures water tanks and swimming pools etc.
Walls and ceiling waterproofing.
Waterproofing of toilets lift pits, kitchen.
Primer for paint on internal and external surfaces.
Waterproofing of hygienic structures like hospitals, pharmaceutical and food processing industries and hatcheries.
ADVANTAGES
Based on water dispersible epoxy hence can be diluted and washed away with water.
It is economical when compared with conventional epoxies.
It is water based hence zero VOC and is environmental friendly.
The film formed is tough and has strong adhesion to all building materials.
DIRECTIONS FOR USE
SURFACE PREPARATION
Remove the plaster from the leaky surface and clean the area to remove all dust, dirt and deleterious materials. For treating a crack chase the crack into a V shaped groove about 10 mm wide and 5 mm deep.
PRIMING
Brush apply one coat of primer prepared by mixing one part base one part reactor and one part water to the surface to be treated or the sides of the crack to be treated and allow it to dry for 6 to 8 hrs.
CRACK FILLING
Mix the base and the reactor components in equal proportion and add white cement and mix it thoroughly to obtain a neat consistency stiff paste. Apply this paste to fill the crack completely and evenly. Allow this paste to cure fully for 24 hrs before subsequent treatment.
WATERPROOFING TREATMENT
After the primer has dried, mix base and reactor components of Damp Guard - EP and water in the proportion of 1:1:1 to obtain an uniform consistency and brush apply this onto the primed surface evenly to cover the surface effectively. In demanding situtations apply two or more coats. Allow this to dry for 24 hrs before application of cement sand render.
PROPERTIES
MATERIAL | TWO COMPONENT WATER DISPERSIBLE EPOXY |
MIXING RATIO | 1:1:1 |
BASE | REACTOR : WATER |
POT LIFE | 60 MTS @ 30 C |
TOUCH DRY/RECOAT TIME | 4 HRS / 6 TO 8 HRS |
INITIAL CURE | 24 HRS |
FINAL CURE | 7 DAYS |
COVERAGE
Damp Guard - EP when applied as a coating gives a coverage of 40 sq ft per kg per cost.
PACKING
It is available in 1, 2 & 20 kgs packing
SHELF LIFE
12 mths if stored in a cool and dry place.
QUALITY ASSURANCE
All “PERMA” branded products are manufactured under strict quality control supervision as per exact manufacturing specification. Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact the nearest Perma staff or distributor.
STATEMENT OF RESPONSIBILITY
Perma branded products when used in accordance with its current published directions for use performs as per its data sheets / catalogue. The manufacturer and the distributor will not be responsible for other materials and conditions of inferior workmanship.